- How To Uninstall Cleaner App
- Diagbox Uninstall And Cleaner Scarymistake
- Diagbox Uninstall And Cleaner Free
DiagBox Uninstall and Cleaner.rar (103,4 Ko, 355 affichages) 'Le vrai signe de l'intelligence, ce n'est pas la connaissance, mais l'imagination' The Following 8 Users Say Thank You to zenata For This Useful Post. (, 06:57 AM) tony.t Wrote: For cleaning your PC, download from Post#1 The DiagBox Uninstall and Cleaner.txt and paste the link to chrome, when mega.nz opens click on Download trough your Browser. Follow the instruction. DiagBox V7.02 Already patched.iso - iso-image with software Update folder with updates. Setup Drivers DiagBox - driver. Ok, that's probably because Diagbox should of been uninstalled first, using the uninstaller in the C: program Files Diagbox folder (DiagboxUninstall.exe). When that has been run, restart the PC, then run the DB cleaner programme to remove the rest of the files and clean up the registry. Installation instructions DiagBox v.7.xx - promptly inserted a new instruction. DiagBox Uninstall and Cleaner - utility to completely remove the software and its tails. Statistics for the diagnosis Citroen. 'DiagBox Uninstall and Cleaner scarymistake' adresse dans doc word. Lens-mania., 12h41-diagbox uninstal-regedit-c.cleaner reboot tu peux aussi utiliser le.
How To Uninstall Cleaner App
This article show the guide on how to install DiagBox v8.01 diagnostic software.This method provided by the cartechnology remember simple,big thanks to him selfless work.
Note: If using a Virtual Machine, ensure Virtualization is enabled in the physical laptop BIOS.
Preparation for Installing DiagBox 8.01 on Notebooks and VMWare Workstation
– Starting with any (32 bit) Windows (preferably XP or 7), install .NET 3.51 and Windows drivers or VMWare Tools (if on VMWare Workstation or Player).
Preparation for Installing DiagBox 8.01 on VirtualBox
– Settings –> System: Motherboard, ensure APIC is OFF, use one processor and enable Virtualization. Allocate enough memory for VM.
– Having installed 32 bit Windows + VirtualBox Guest Additions + .NET 3.51, use the Powershell Command 'Get-WMIObject win32_BIOS' or the 'DMIdecode' tool to obtain BIOS information (not essential).
– Close VirtualBox and start an administrator's CMD, navigate to 'C:Program FilesOracleVirtualBox' and execute the following command (Replacing 'Your VM' with your Virtual Machine's name, and System Serial with your hardware's or any code or text such as 'CDN29326BH'):
C:Program FilesOracleVirtualBox>VBoxManage setextradata 'Your VM' 'VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial' 'System Serial'
Installing DiagBox 8.01
1- Install DiagBox 7.01 and restart DiagBox to run update 7.02. Install update 7.xx-7.57 (this will create 'C:AWRootdtwrcfgConfig.sys').
2- Install 'VC++ 2008 Redistributable Package', a copy will be available in 'C:teleassistancevisualCvcredist_x86.exe' after installing DiagBox.
3- Restart the computer and use 'Kill_DiagBox_Tasks.bat' to stop related processes and rename 'C:AWRoot' to 'C:AWRoot7'
4- Run DiagBox 8.01 installation (it will uninstall v7.xx first) until it requests Activation. Close it (X) and run the tool 'AWRoot_v7_Conf+Ativation_v8.exe' it will copy configuration from 'C:AWRoot7..' and inject the necessary files.
5- Run DiagBox again, it should continue the installation successfully.
Done !,
Restart DiagBox 8.01 as Administrator to confirm all is well (don't be concerned about the reported version and do not start Lexia or PP2000 yet). If you face an issue, run the activation tool again and/or review 'Versions' below.
If DiagBox runs fine, ensure you keep a backup copy of the file 'C:AWRootbinfiAPPDIAG.SYS' in a safe location.
Installing Updates
1- Download and install 'DiagBox_updt_802.ISO' update.
2- Download and install subsequent v8.xx updates or Maitresox updates (from 7.66+).
Tool you need:
DiagBox Full v8.01 ISO:
AWRoot_v7_Conf+Ativation_v8.exe No password
DiagBox updates working with DiagBox V8.01 based on v7.xx profile, Extraction Password: Simple
DiagBox_updt_802_Simple.exe
DiagBox_updt_803-810_Simple.exe
DiagBox_updt_811-814_Simple.exe
DiagBox_updt_815-817_Simple.exe
For those who wish to stay with (ISO 639-1) standard:
DiagBox_updt_803-808_Simple.exe (7.72) Password: Simple #808
And those who wish to continue further:
DiagBox_updt_810_Simple.exe (7.74) No Password
Cache Contents Restorer No password
Kill_DiagBox_Tasks
Versions
DiagBox will run and display the (8.xx or 7.xx) version number listed in 'AWRootbinfiversion.ini' file. However, Lexia or PP2000 will fail to operate with 'version.ini' set to '08.xx' and 'APPDIAG.SYS' will be corrupted and will need to be restored before DiagBox will work again.
So, for DiagBox, Lexia and PP2000 to operate, set the version to '7.xx' or '7.xxx' (07.81 or 07.817 can be set to indicate the true DiagBox 8 version).
[APPLICATION]
version=07.817
It is possible to operate Lexia/PP2000 (after starting DiagBox with 8.xx) by starting DiagBox while having 'version.ini' listing the 8.xx only (or first), then changing it to 7.xx or commenting the line 'version=08.xx' and saving BEFORE starting LEXIA or PP2000 as shown below.
[APPLICATION]
;version=08.01
version=07.65
Diagbox Uninstall And Cleaner Scarymistake
Updates
– DiagBox v7 and v8 install and run on all x86 (32bit) Windows including 10 TH1, TH2, RS1 and RS2.
– Entering a System Serial for the Virtual Machine (as described above) resolves the 'psaAagent.exe' and the missing tabs issue on VirtualBox.
– If you get 'Error 2' after restarting DiagBox, try commenting 'version=8.xx' in 'version.ini' before restarting DiagBox again.
P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.
Someone put the full installation process on the net, just edit 'version.ini' as described above.
This article show the guide on how to install DiagBox v8.01 diagnostic software.This method provided by the cartechnology remember simple,big thanks to him selfless work.
Note: If using a Virtual Machine, ensure Virtualization is enabled in the physical laptop BIOS.
Preparation for Installing DiagBox 8.01 on Notebooks and VMWare Workstation
– Starting with any (32 bit) Windows (preferably XP or 7), install .NET 3.51 and Windows drivers or VMWare Tools (if on VMWare Workstation or Player).
Preparation for Installing DiagBox 8.01 on VirtualBox
– Settings –> System: Motherboard, ensure APIC is OFF, use one processor and enable Virtualization. Allocate enough memory for VM.
– Having installed 32 bit Windows + VirtualBox Guest Additions + .NET 3.51, use the Powershell Command 'Get-WMIObject win32_BIOS' or the 'DMIdecode' tool to obtain BIOS information (not essential).
– Close VirtualBox and start an administrator's CMD, navigate to 'C:Program FilesOracleVirtualBox' and execute the following command (Replacing 'Your VM' with your Virtual Machine's name, and System Serial with your hardware's or any code or text such as 'CDN29326BH'):
C:Program FilesOracleVirtualBox>VBoxManage setextradata 'Your VM' 'VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial' 'System Serial'
Installing DiagBox 8.01
1- Install DiagBox 7.01 and restart DiagBox to run update 7.02. Install update 7.xx-7.57 (this will create 'C:AWRootdtwrcfgConfig.sys').
2- Install 'VC++ 2008 Redistributable Package', a copy will be available in 'C:teleassistancevisualCvcredist_x86.exe' after installing DiagBox.
3- Restart the computer and use 'Kill_DiagBox_Tasks.bat' to stop related processes and rename 'C:AWRoot' to 'C:AWRoot7'
4- Run DiagBox 8.01 installation (it will uninstall v7.xx first) until it requests Activation. Close it (X) and run the tool 'AWRoot_v7_Conf+Ativation_v8.exe' it will copy configuration from 'C:AWRoot7..' and inject the necessary files.
5- Run DiagBox again, it should continue the installation successfully.
Done !,
Restart DiagBox 8.01 as Administrator to confirm all is well (don't be concerned about the reported version and do not start Lexia or PP2000 yet). If you face an issue, run the activation tool again and/or review 'Versions' below.
If DiagBox runs fine, ensure you keep a backup copy of the file 'C:AWRootbinfiAPPDIAG.SYS' in a safe location.
Installing Updates
1- Download and install 'DiagBox_updt_802.ISO' update.
2- Download and install subsequent v8.xx updates or Maitresox updates (from 7.66+).
Tool you need:
DiagBox Full v8.01 ISO:
AWRoot_v7_Conf+Ativation_v8.exe No password
DiagBox updates working with DiagBox V8.01 based on v7.xx profile, Extraction Password: Simple
DiagBox_updt_802_Simple.exe
DiagBox_updt_803-810_Simple.exe
DiagBox_updt_811-814_Simple.exe
DiagBox_updt_815-817_Simple.exe
For those who wish to stay with (ISO 639-1) standard:
DiagBox_updt_803-808_Simple.exe (7.72) Password: Simple #808
And those who wish to continue further:
DiagBox_updt_810_Simple.exe (7.74) No Password
Cache Contents Restorer No password
Kill_DiagBox_Tasks
Versions
DiagBox will run and display the (8.xx or 7.xx) version number listed in 'AWRootbinfiversion.ini' file. However, Lexia or PP2000 will fail to operate with 'version.ini' set to '08.xx' and 'APPDIAG.SYS' will be corrupted and will need to be restored before DiagBox will work again.
So, for DiagBox, Lexia and PP2000 to operate, set the version to '7.xx' or '7.xxx' (07.81 or 07.817 can be set to indicate the true DiagBox 8 version).
[APPLICATION]
version=07.817
It is possible to operate Lexia/PP2000 (after starting DiagBox with 8.xx) by starting DiagBox while having 'version.ini' listing the 8.xx only (or first), then changing it to 7.xx or commenting the line 'version=08.xx' and saving BEFORE starting LEXIA or PP2000 as shown below.
[APPLICATION]
;version=08.01
version=07.65
Diagbox Uninstall And Cleaner Scarymistake
Updates
– DiagBox v7 and v8 install and run on all x86 (32bit) Windows including 10 TH1, TH2, RS1 and RS2.
– Entering a System Serial for the Virtual Machine (as described above) resolves the 'psaAagent.exe' and the missing tabs issue on VirtualBox.
– If you get 'Error 2' after restarting DiagBox, try commenting 'version=8.xx' in 'version.ini' before restarting DiagBox again.
P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.
Someone put the full installation process on the net, just edit 'version.ini' as described above.
Diagbox Uninstall And Cleaner Free
